Lutron and GRAFIK Eye are registered trademarks. The NGRX-PB increases the GRX Main Control single zone load Figure 1.
Wiring Diagram. GXI Installer’s Guide.
IMPORTANT! GRAFIK Integrale lighting controls must be installed by a qualified Improper wiring can result in personal injury or damage to GRAFIK Integrale lighting controls or other .
See diagram to the right for. WIRING.
GRAFIK Eye and. on Same Link. APPLICATION NOTE W 9/ Overview.
Overview. In some installations it may be more efficient to have. Wiring diagrams.
GRAFIK Eye Control shall provide 4 preset lighting scenes and ‘off’ for up .. diagrams and written product. CONTENTS.
GRAFIK SERIES. ® Model Numbers/Wiring Diagrams.
. With GRAFIK Eye® and GRAFIK IntegraleTM, each zone in a space is set.from the power wiring.
Enter the Class 2 / PELV wires through the knockout adjacent to the —10 V0 – terminal blocks. The barrier ensures separation and is flexible to allow access to the terminals. The barrier must be in place when installation is complete.
Wiring Diagram A: HomeWorks ® Wallbox Power Module / GRAFIK Eye ® Control Unit. GRAFIK Eye™ / Series Match an activity or mood to the visual environment.
The benefits Recall preset scenes with the touch of a button. Products GRAFIK Eye ,GRAFIK Integrale™, GRAFIK Eye Recommended specifications GRAFIK Eye Control shall provide 4 preset lighting scenes and ‘off’ for up to 6 control zones.
GRAFIK Eye provides an energy saving solution for both new construction and renovation projects. By controlling the light in multiple settings with numerous preset scenes, GRAFIK Eye can create dramatic environments while drastically reducing energy expenses. ImPRoPeR wIRIng oR InSTALLATIon.
ThIS wARRAnTy doeS noT CoveR InCIdenTAL, oR SPeCIAL dAmAgeS. The PuRChASeR ASSumeS And wILL hoLd hARmLeSS LuTRon In ReSPeCT oF ALL SuCh LoSS. LuTRon’S LIAbILITy on Any CLAIm FoR dAmAgeS ARISIng ouT oF oR In ConneCTIon wITh The mAnuFACTuRe, SALe, InSTALLATIon, deLIveRy, oR uSe oF The unIT.
GRAFIK Eye System Wiring Diagram below illustrates basic system wiring for GRAFIK Eye Series Control Units. Note: For wiring multiple Control Units, Interfaces, and Accessory Controls, system wiring should be: Low Voltage Class 2 (SELV) 4-wire daisy chain of two No.
18 (mm 2) twisted pairs (4 wires); two Belden , or one Liberty LU02PSH18EX-GRN.Lutron, Grafik Eye, GRXT-WHWiring Diagrams