In his latest article, Mark van der Feyst examines the “Minuteman” hose load, which is designed to aid the firefighter in getting the initial attack.
The nozzle person can also grab and flip the hose as they put it up on their shoulder, instantly creating a minuteman load on the last section or two if deploying. Back to Basics: The minuteman hose load.
The minuteman hose load. November 30, Written by Mark van der Feyst.
Minuteman Load (Female coupling on top, Male coupling on bottom). 4) Hose loads are Split (Side by Side) or a Combination Load (One.The Minuteman Load One common variation of the flat load is the minuteman load.
It requires some thought to load, but it’s easier to load than the triple- layer load. This load is popular because it allows the hose to flake and deploy from the nozzle person’s shoulder as it’s advanced into a .
Foot Hose Load. foot Hotel Pack: Deployment and Load.
Modified Minuteman Deployment. Modified Minuteman Bed Load. Quick Attack.
Fire Behavior. Ladder Operations.
Vertical Ventilation. Station 46 Air Compressor.
Packaging and Moving a downed FF. Animated Knots by Grog’s.
After completing this lesson, the student shall be able to use, care for, and perform maintenance on fire hose, couplings, hose appliances, and tools and perform various hose loads and finishes according to the authority having jurisdiction (AHJ). To load a minuteman hose load, you will need to first determine if you want to load foot or foot preconnect.
For the foot preconnect, you will need three sections of hose; for the foot preconnect, you will need four sections of hose. May 16, · it takes a flat and makes it a minuteman in one motion.
we load the tray with of hose. then there are folds at the 75′-ish and the ‘-ish. the nozzle stays on top and into the center of the rig.
the hose can be pulled off both sides of the pump very easily.Common Hose Loads & Finishes – Fire RescueMinuteman hose load – Firehouse Forums – Firefighting Discussion