You gotta use the 3rz clutch, and 3rz bell housing should bolt up to your R You can trim the harness.
The ECM does not have to be tune. I might have put 50 hours if no more just figuring out the wiring swap.
But I didn't burnt any component and it fired up at first crank with no check. I know that the tranny will bolt up the motor will bolt up you should get the 3rz ecu.
.. I don't think there should be a problem with your wiring. Tacomas & 4Runners - Removing 3RZ wiring is to get all the vsv's and or anything else you will need for the swap.
Tacomas & 4Runners - Removing 3RZ wiring is to get all the vsv's and or anything else you will need for the swap.The wiring is possibly the most complicated part of a 3RZ-FE engine conversion. The 3RZ-FE / 2RZ-FE (L or L) fuel injection system is entirely different from that of the older Toyotas. This means the 3RZ electronics will have to be in installed in your older Toyota in order to make this engine swap possible.
California-specific 3RZ-FE models. I could not find any CA-spec 3RZ-FE wiring diagrams, but one copy of the 3RZ-FE wiring guide refers to its connector illustration as “Except California”.
Consequently, Iʼve listed the 3RZ-FE guide as being “Federal”, but I donʼt have the corresponding CA-spec guide. Find great deals on eBay for ls1 swap wiring harness,+ followers on Twitter.
Dec 29, · CONVERSION WIRING SPECIALISTS Take the guesswork out of your conversion wiring. We offer plug and play conversion and stand alone wiring harnesses for swaps, 2rz/3rz’s and more.
Simplify your swap’s wiring with one of our plug and play conversion harnesses. Apr 05, · Actually we have been working along side with ORS to get this harness on the market.
We are pleased that they are willing to produce a harness for the 3RZ.3rz swap questions3RZ swap wiring harness
1 thoughts on “3rz swap wiring”
I suggest you to visit a site on which there is a lot of information on a theme interesting you.