A cooling fan relay is used on vehicles that have an electrical fan to the cooling fan relay gets its signal from the ECM, the wiring diagram will.
If thermostat is equipped with optional heat- ing/cooling sub-base or relay box ( see. Figure 1), set fan switch to “ON.” To Balance Air Distribution.
1. On a typical. Nordyne / Intertherm Installation Instructions 5 Wire Heating/Cooling Thermostat.
Cooling. Blower. Relay.
Configuration .. and the fan switch to ” AUTO”. I have an intertherm Nordyne E2EBHA Electric Furnace.
your missing your fan relay, also I see a wiring fault@ electric heat I dont understand the diagrams to be able to use them. Customer I see a light blue wire coming out of read more INSTALLED RELAY THAT RUNS THE BLOWER MOTOR AND HEAT. If thermostat is equipped with optional heat- ing/cooling sub-base or relay box ( see.
Figure 1), set fan switch to “ON.” To Balance Air Distribution. 1.
On a typical.Nordyne Furnace Model E2EBHB (E2EBHB) Parts – Shop online or call Fast shipping. Open 7 days a week. day return policy.
Not exactly sure as to wich fan relay you are talking about (cooling fan or the relay for the blower motor for the air conditioning) Kind of took a guess and went with the engine cooling fan relay. Below is a wiring diagram for that schematron.org you need the other relay, a larger wiring diagram as this was the largest I could post on here or if you. Installing Control Circuit Wiring IMPORTANT: NOTE: Installation of a five-wire thermostat circuit is recommended to provide for future If a relay box is installed, blower speeds addition of a heat/cool thermostat.
for heating and cooling are set inside Install the 24V control-circuit cable through the relay box (see instructions plastic bushing. Intertherm / Nordyne Blower Relay Fan Blower Relay, 24 VAC 50/60 Hz, SPST – single pole – single throw.
Intertherm / Nordyne Heating & Cooling Thermostat Intertherm / Nordyne Blower Motor Intertherm / Nordyne Blower Motor Our Price: $/5(10). Refer to unit wiring diagram.
b. With an ohmmeter, test for continuity across The E2EB has a factory installed cooling relay. The cooling relay operates the air circulator at the high speed when the relay is energized.
The relay is E2 Electric Furnace Service Manual.Intertherm E2eb ha Wiring Diagram | Wiring LibraryHow to rewire fan relay on a nordyne e2ebhb – Fixya