If you buy the Mopar Performance electronic ignition system, it comes with extensive instructions, wiring diagrams, and other information. That’s a fine tutorial on how to install a Mopar electronic ignition box, but a GM HEI module creates a hotter .
attention to the condition of your distributor cap, rotor and spark plug wires. You’ll have to pirate one out of the wiring harness of a Mopar product that pirate the connector and wiring pigtail from a GM HEI distributor in a junkyard, look .
I still need to get some pictures of this and draw some wiring diagrams to put up. How To Convert A Ford Or Chrysler Ignition To GM HEI Or if you have a Jeep or a Mopar engine running a ballast resistor ignition, you’re We’ve included a simplified wiring diagram to show you how it all comes together.
GM HEI conversion (A ‘How To’) Dodge Ram Trucks (D, W-series) A factory plug that will connect to the Mopar distributor pickup plug (Junkyard). The other colors on the schematic I made are NOT necessarily correct, OK, you’ ve got your module mounted, and have your wires made up.
I don’t know that wiring schematic. In my cars, the thicker brown wire is only hot in “crank”, termed “IGN2” to bypass the ballast. But it is not hot in.Although we did this on a slant six, the same basic conversion should work on any Mopar engine that you can get an electronic distributor for.
Basically, you re-use the distributor from a normal Mopar electronic ignition and replace the Mopar ignition controller with a “4-pin” GM HEI module from a non-computer controlled HEI system. Hei conversion wiring together with chevy wiring diagram in addition adaptar 20regulador 20de 20alternador a on toyota alternator wiring diagram also msd pro billet distributor wiring diagram further mopar wiring diagram together with chrysler wiring diagram along with delco 12si alternator wiring diagram along with delco wiring. While you could use a Duraspark box, they are much larger than an HEI module.
Or if you have a Jeep or a Mopar engine running a ballast resistor ignition, you’re giving up ignition power that. Chevy Hei Distributor Wiring Diagram I Have The Distributor Myself And Am Planning On Hooking Up The Nitrous System As Soon As My Controller Arrives With Distributor Wiring Diagram distributor wiring diagram on mopar, gm distributor wiring diagram, hei distributor wiring diagram.
Mopar HEI Conversion Bracket. Available for immediate shipment.
This is a nice bracket that mounts the GM HEI module to the bottom of any Chrysler V8 electronic distributor. Bolt this on and dump the ballast resistor forever! It is also very nice for use in older Mopar vehicles where you don’t want to mount a large ignition box to your firewall.GM HEI Conversion | Moparts Question and Answer | Moparts ForumsMopar HEI Conversion
