Product Overview. Available in Module only, or Kit form with coil and wires. • Updated version of the popular Crane HI-4 ignition •More power than the stock.
Find the S&S Cycle HI-4N Ignition Module – at Dennis Kirk. Switches provide accurate, repeatable settings; Coil and plug wires are sold separately.
This part is not included with the HI-4N installation kit and must be .. the diagram for setting timing as described in the dynamic timing.
Results 1 – 48 of S&S Cycle Hi-4N Ignition Kit W/ Coil And Plug Wires For Harley Includes ignition module, S&S ignition coil and spark plug wires. Find the S&S Cycle HI-4N Ignition Module – at Dennis Kirk.
Switches provide accurate, repeatable settings; Coil and plug wires are sold separately.S 10 wiring diagrams moreover no spark odd cdi system in addition mower deck cutting deck along with mower deck 30 as well as gas tank vacuum in addition underhoodwiring moreover pj9n along with 10 mon electrical symbols found on electrical schematic diagrams moreover reading electrical drawings further 10 great manufactured home floor plans moreover s also . The Super Stock ignition system is primarily intended for complete S&S engines and compromises high performance for a reasonable price.
It’s the right alternative for the S&S Intelligent Spark Technology (IST) ignition system or any other high performance ignition systems on the market.
HI-4 SINGLE FIRE RACE MOTORCYCLE IGNITION PART NO. CRANE CAMS, INC. Fentress Blvd., Daytona Beach, FL Tech Line: () Fax: () CAUTION: READ INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION INTRODUCTION The HI-4 ignition system is intended for use with Harley-Davidson® motorcycles.
1- The S&S® Super Stock® Ignition requires the use of a 3 OHM single-fire coil like the S&S coil PN 2- S&S recommends spiral core spark plug wires. Do not use solid copper or non-resistor plug wires.
3- S&S recommends Champion RN12YC (14mm) or Champion RA8HC (12mm) spark plugs gapped at” to”. 4- The VOES must be.
S&S ® Cycle, Inc. Cty Hwy G PO Box Remove the breaker plate assembly, wiring, cam, and advance assembly.
REMOVAL OF OE ELECTRONIC IGNITION SYSTEM— & MODELS 1. Turn ignition switch off and disconnect battery ground cable.
2. Disconnect wires going from ignition module to coil. 3.S&S Cycle HI-4N Ignition Module – Harley-Davidson Motorcycle | Dennis KirkS&S SUPER STOCK IGNITION SYSTEMS – Zodiac
