NORTON WASSELL VOLTAGE REGULATOR RECTIFIER CHOPPER CAFE BOBBER PN# TBS W NORTON PODTRONICS HIGH OUTPUT 12V 3 PHASE REGULATOR . IF YOU HAVE AN OLD 6 VOLT, 3 WIRE STATOR YOU CAN CONVERT IT TO 12 VOLT BY TO 12 VOLTS ALSO (SEE DIAGRAM BELOW).
Anyone know of a just-the-basics wiring diagram for a ’75 Commando . I am using a Lucas 3-phase rotor with a Podtronics regulator/rectifier.
Podtronics 12 Volt Single Phase Solid State Watt Battery Eliminator. If your a This unit comes with a detailed manufactures instruction manual for the “Do It Yourself” guys!
Compact Power module measures approx 2 1/2″ by approx 3″. Ford Voltage Regulator Wiring Diagram Kawasaki ZX6R Wiring-Diagram Fuel Pump Suzuki Rectifier and Voltage Regulator Yamaha 3 Phase.
Single phase replacement for Lucas rectifier and zener diode. 1.
Disconnect the ground wire from your battery. Observe if Diagram for three phase installation.Regulator Wiring Diagram – Comprehensive Wiring Diagrams • 78 m voltage regulator wiring diagram schematics wiring diagrams u rh seniorlivinguniversity co generator regulator wiring diagram generator Podtronics Rectifier Wiring Diagram – The first (upper) diagram shows the insertion of a Podtronics rectifier/regulator and an Available in both single phase and three phase. Suitable for use with high output single phase stator.
Will work with either 2-wire or 3-wire AC alternator. Can be used to convert older 6 volt alternators to 12 volts.
Can be used with either negative ground or positive ground. Manufacturers Instructions.
PODtronics. Single phase replacement for Lucas rectifier and zenor diode. 1. Disconnect the ground wire from your battery.
Observe if your system is positive or negative ground. 2.
Locate and remove the zener diode. You will no longer need it. (Hint: it’s gold colored) 3.
Locate and remove the old rectifier. I also recently bought from NOC spares a Podtronics Regulator. The instructions say the Podtronics will not work with a 3 phase alternator with a 9 coil stator.
The wiring diagram shows a cable coming from the Rectifier to the Zenner then on to the Capacitor. Manufacturers Instructions. PODtronics. Single phase replacement for Lucas rectifier and zenor diode.
1. Disconnect the ground wire from your battery.
Observe if your system is positive or negative ground. 2.
Locate and remove the zener diode. You will no longer need it.
(Hint: it’s gold colored) 3. Locate and remove the old rectifier.Old Britts, Regulator-Rectifier, 12V,+or-, 3 Phase, PodtronicsPODtronics — Norton Owners Club Website
