For over 70 years, Axxess Integrate has developed innovative, time saving solutions to help Vehicle Fit Guide& Installation Instructions to Factory Radio.
Download product instructions, installation insructions and the product application guide. INSTALLATION INSTRUCTIONS FOR PART INSTGMOS Cutting Tool Connect the Red wire to the ignition wire of the aftermarket radio. • Connect the.
From the pin harness: • Connect the Red wires to the ignition wire of the aftermarket radio. • Connect the Orange/White wire is not used in this application.
KIT FEATURES. • One Interface does it all - No additional interfaces needed. • Designed to be compatible with all major radio brands.
• Auto detects vehicle type.Axxess Interface Control Box for Chrysler Most vehicles are built with their own wiring harness specifically connecting their OEM hardware such as an In-Dash receiver. the schematron.org team has worked to put together one of the largest selections of car audio/stereo in this country. About Us; Testimonials; Customer Service Hours.
Note: If wiring is not available on our website for your vehicle, you will need to obtain this yourself. Please check first with Axxess Tech Support department at TECH, as we may have this information. Into vehicle: 1) Connect the Black wire of the ASWC-1 to the ground.
You may use the same grounding point as the aftermarket radio; but. the vehicles wiring harnesses. • Reconnect the negative battery terminal.
• Cycle the key, by turning the ignition on for 30 seconds. Then off and on again to test the radio. Installing the GMOS-LAN 1) Turn the ignition on if not already, and then turn the radio on to verify that the radio works.
I got this for my Prius Touring with jbl and navigation. No wiring diagram for this interface is included but was very easy to find the pdf file through a google search.
Install was a breeze as I was removing the android double din head unit from my totaled Prius non jbl and needed this harness to make it work/5(). into the vehicles wiring harness. • Reconnect the negative battery terminal.
• Cycle the key, by turning the ignition on for 30 seconds. Then off and on again to test the radio.
Testing the CHTO • Turn the ignition on if not already, and then turn the radio on to verify that the radio works.Axxess Integrate - Comprehensive Interface Products for Vehicle Upgradesschematron.org: Metra TYTO JBL Amplifier Interface Harness: AXXESS(R): Car Electronics