and a plug-in wiring harness for .. Door Control Relays Chart. .
Camden CX- EDL Grade 1 electric strike for mortise and $ CM, CM , CM, CM and CM push buttons CM Camden’s Lock-Out Relay is used on Automatic Swing Doors to “Lock-out” 24V AC/DC. • Plug-In connectors facilitate wiring.
• Dimensions: CM ‘ Universal’ 2” Square Illuminated Push Buttons are supplied with a single . CM- Chart below shows the most popular configurations. frame for installation, and are horizontally and vertically adjustable for EZ ..
CM- COLORS: Add suffix to product number for button color: (R) Red, (B) Blue. Camden’s Lock-Out Relay is used on Automatic Swing Doors to “Lock-out” 24V AC/DC. • Plug-In connectors facilitate wiring.
• Dimensions: CM ‘ Universal’ 2” Square Illuminated Push Buttons are supplied with a single . CM- Chart below shows the most popular configurations.
CM Series Locking push buttons are specially designed and manufactured for lock-out or emergency applications. Once pushed, the button latches and.CM Active Infrared “Hands-Free” Switch Installation Instructions 2-GANG (or 4×4) ELECTRICAL BOX: CMW 1a – If using an in-wall box ensure the box is plumb and square, and flush with the wall surface.
(See Diagram 1) 1b – If using a surface box, ensure it is secure & plumb.
1c – If using a 4 x 4 box, ensure the box is plumb and. 12 great camden door controls cm 30e wiring diagram wiring also with Elegant of camden door controls cm 30e wiring diagram nc energy along with Camden cm w request to exit sensor including Elegant of camden door controls cm 30e wiring diagram nc energy also with Www camdencontrols com together with Cm 30e camden door controls along. Camden Door Controls CX switching network is an economical door interface relay. Relay 1 has an adjustable delay-on-release of seconds.
Relay 2 has a delay on-operate of seconds, and delay-on-release of seconds. The CX has been designed for .
Connect the appropriate wired to your devices as per the enclosed wiring diagram. Tuck wiring into box (retrofit box included), and fasten switch plate using standard or tamper screws provided. Wiring Six color coded leads are provided.
Camden CM Camden Key switches are suitable for virtually all types of cams in addition to all 1″, /8″ and /4″ mortise cylinders. At times, two switches are required for maintained/momentary alternating on/off.ADI | Camden Door Controls U.S | CM | LOCKING MHRM EXT SWT N/O N/CADI | Camden Door Controls U.S | CX | DOOR INTERFACE RELAY