In this video I show how I installed my Castle Creations 10 Amp BEC The Power wire from the ESC’s internal BEC needs to be removed to. The waterproof Castle BEC has two sets of wires on the output side: +/- And + /-/signal I’m assuming that if I’m using the Holmes RX bypass.
The waterproof Castle BEC has two sets of wires on the output side: +/- And + /-/signal I’m assuming that if I’m using the Holmes RX bypass. The CC BEC Pro is designed to operate at up to 12S LiPo (V) with a 20A* Weight with full length wires, power wires may be shortened to save weight.
The CC BEC is designed to operate at up to 6S LiPo with a 10A* peak servo load . Weight with full length wires, power wires may be shortened to save weight.Apr 03, · I want to ensure i don’t fry anything, since the kraton has the connector with 2 battery ports on it i got a bit confused on the wiring As of right now i am using a 6s single battery and i have an extension cable with the castle bec connected to the black and red cables, and that is going to the esc I have the cable bridge on the other battery connector since im only using a single pack.
Oct 13, · In this video I show how I installed my Castle Creations 10 Amp BEC with a Deans 3 pin connector and servo extension removing the red ESC wire. Power Management. CC BEC (Battery Eliminator Circuit) is a small device that eliminates the need for a receiver battery.
It draws voltage from the motor batteries and drops it to a voltage level that is suitable for your receiver and servos. castle holiday schedule. thurs 12/06 and fri 12/07 castle will be conducting inventory and will not be shipping website orders.
mon 12/24 and tues 12/25 castle offices will be closed in observation of the christmas holiday. This is the Castle Creations CCBEC, 10 Amp Adjustable BEC.
The CC BEC is a little device that eliminates the need for a receiver and servo battery schematron.org: CCBEC 10A PEAK 25V MAX INPUT SBECCCBEC 10A PEAK 25V MAX INPUT SBEC