Hayward Super Pump Wiring Diagram L1

hayward super pump wiring diagram l1

I’m trying to make sure that I’m wiring my Hayward pool pump correctly.

hayward super pump wiring diagram l1

There are There should be a diagram on the inside of the wiring compartment cover. Are the Attach the white supply wire to terminal 1 of Line 1 (L1).

hayward super pump wiring diagram l1

I think yours is a V AC pump L1 would be the “black” wire and L2 would be the “red” wire. Please check your motor documentation to. i bough a hayward hp superpump (used) and it was wired for v ill do what the wiring diagram says and feed L1 and L2 and dont worry.

hayward super pump wiring diagram l1

I’m wiring a new pump (USQ) for v operation The old pump’s diagram ( v) has Line on L2. New pump’s diagram suggests Line on.

hayward super pump wiring diagram l1

hello, how can I wiring the power supply to my pool pump hayward super I do have 2 pics below, the first pic the hot wire is connect to the L1.Hayward Super Pump Wiring Diagram L1 Tried turning plug so white wire connects to A, pump only hums when you If you are replacing a 2 hp pump with a Hayward 2 hp super pump on a line is L1 white and L2 Need wiring diagram for Hayward dual Super 2 speed pump. The FHP can replace a Hayward Super Pump or a Pentair.

hayward super pump wiring diagram l1

hayward super pump wiring diagram – hp hp rpm 56J Frame / Volts Hayward Northstar Swimming Pool Pump Motor – AO Smith Electri. This is the motor Hayward uses on the Northstar inground pool pump.

hayward super pump wiring diagram l1

It can also be used on any other pump requiring a 56J frame motor. This is an Energy Efficient, full rated motor with a High Service.

hayward super pump wiring diagram l1

Super Pump VS is easily installed either as a programmable stand-alone pump or with a Hayward or third party controller and features an easy-to-use digital control interface that can be mounted in four different positions on the pump or removed and mounted on the wall for total user convenience. May 13,  · Re: Wiring a Hayward Super Pump It doesn’t matter which wire goes to line 1 or 2 as long as 1 connects to L1 the other to L2. Use the screws to secure the wire not the spade terminals.

hayward super pump wiring diagram l1

If you are wiring for V, the three wires coming to the pool pump from the circuit box are red, black and green. In this example for Hayward pool pumps, red will go to the L1 .SOLVED: Which wires go to L1 and L2 on a pool motor HP – FixyaSOLVED: Wire Hayward Super Pump for – Fixya

hayward super pump wiring diagram l1