Widely used on truck, generators/gen set, bus and marine for fuel level detection Damping cover is optional, and assembled with C-ring, easy for installation. That means the gauge and the sending unit are using different standards (one may be using ·Does KUS carry a fuel sender that can be shortened in length?.
IMPORTANT: AVOID USING POWER TOOLS AROUND FUEL VAPORS WHICH ARE Connect (black) wire from the WEMA sending unit to gauge hook-up. IMPORTANT: AVOID USING POWER TOOLS AROUND FUEL VAPORS WHICH ARE Connect (black) wire from the WEMA sending unit to gauge hook-up.
This KUS fuel & liquid sender is designed to work with gauges using the on the same resistance – use your gauges wiring diagram to correctly install the wires.The fuel tank should be grounded and the sender wire pink should be connected to the sender terminal on the sending unit this is the correct wiring. The sending unit will ground through the mount screws. The fuel gauge reads the resistance to ground check the wires on the back of the gauge pink to S terminal and black to G terminal.
run wiring from gauge to fuel cell. Connect the Black wire from the Probe to the “G” or Ground terminal on your gauge.
Connect the Red wire to the “S” or Sender terminal on your gauge. Connect the yellow wire to the Gold terminal on the Low Level LED Lamp and connect the silver terminal on the lamp to Ground.
Connect the “I. wiring instructions. Always disconnect battery ground before making any electrical connections.
Parts of the Fuel Level Sender Unit to be Ad Fuel Level Sender Installation: Refer to the VDO catalog for matching fuel gauges. The unit can be adjusted to read accurately in tanks from 6″ to 23″ deep. Diagram B I. Measure the depth of your fuel tank. KUS is the leading global manufacturer and provider of liquid level sensor and level sensing solutions for fuel tanks, water tanks, and black and grey water holding tanks.
Our market orientation is worldwide and customers span across agriculture, automotive, construction, marine, and power industry. Connect sender wire from fuel gauge to the threaded screw terminal on sender.
Connect ground wire to 1/4″ fasson terminal on sender. GASOLINE IS EXTREMELY FLAMMABLE. KEEP TANK AREA FREE FROM SPARKS AND FLAMES.
EMPTY TANK OF FUEL AND FUMES BEFORE CONTINUING WITH INSTALLATION. Gauge and Sending Unit Wiring Diagram and Industry Recommendations.Fuel Gauge Sender mm Ohm KUS Marine Boating Auto Petrol Gas IP67 Liquid | eBayInstalling A Fuel Gauge and Sender | Hotrod Hotline