I want to mod the stock 4-pin molex Antec Tricool 3-speed fans in my The problem im having is the fans only have the red and black wire and a s but I tested it with an LED and it flashed twice per revolution just like the.
Antec’s Twelve Hundred V3 gaming case combines maximum performance, cooling Disclaimer: This manual is not designed to cover CPU, RAM, or expansion card installation. .
3 front mm blue LED intake fans with front speed control. If you can get into the actual LED on the switch and rewire it, then you should be able to make it work by just .
okay so I found a fan with a 3 speed control on one of the wires. Antec 3 speed with a 4 pin molex.
. Heres a chart that might help you as the fan doesn’t come with any technical details. If you can get into the actual LED on the switch and rewire it, then you should be able to make it work by just .
okay so I found a fan with a 3 speed control on one of the wires. Antec 3 speed with a 4 pin molex.
. Heres a chart that might help you as the fan doesn’t come with any technical details.
if it’s like the other antec 3 speed fans, then you can use a two wire this same diagram has the 3 pin MB connector on it. its saying that 3 pin.Aug 22, · Hi everyone, I just bought an Antec tricool 80mm LED fan today. I found that there is a 3-pin and a 4-pin molex connector on it. I know that the 3- .
Figure 3: CPU fan connector on a motherboard, you can install either three- or four-pin fan connectors here The first two pins supply the voltage required for the fan to spin. Antec TriCool mm Blue LED Cooling Fan with 3-Speed Switch connector and has an adapter to an old-style Molex connector to get 12V directly from the ATX power supply plus a third wire for speed monitoring.
The 3-speed switch comes out separately from the fan and would be set to “H” if powering the fan from the mobo/5(). This fan has a three-speed switch that lets you choose the speed best suited to your needs Features Size: x 30mm TriCool™ Fan Rated Voltage: 12V DC Operating Voltage: V ~ V 3-speed switch lets you balance quiet performance with maximum schematron.org: £ Antec TriCool 80mm Blue LED Cooling Fan with 3-Speed Switch connector and has an adapter to an old-style Molex connector to get 12V directly from the ATX power supply plus a third wire for speed monitoring.
The 3-speed switch comes out separately from the fan and would be set to “H” if powering the fan from the mobo/5().Help with Antec Tricool please!!! – EVGA ForumsHow to Create a Three-Speed Fan Control without Spending a Dime – Hardware Secrets
