reserved.
Maxwell Marine International reserves the right to make pg Wiring schematic (series wound motor – P/6 Solenoid Pack). Vetus-Maxwell APAC Ltd reserves the right to make Identify any bulkheads, wiring or piping under the deck that ..
Wiring Schematic. Congratulations on your purchase of a Maxwell windlass. Please read these ..
Windlass. Wiring schematic (series wound motor).
Wiring Page Projects. This is essentially standard wiring for my new windlass, and more importantly I don’t like Maxwell’s breaker panel as an on/off switch.
Maxwell Marine Anchor winches, capstans and windlasses, anchoring systems The following schematic diagrams illustrate the basic requirements for various to illustrate the differences between wiring single, dual and variable speed.VWC, VWCLP OWNERS MANUAL Wiring Diagram (Dual Direction) P 27 Wiring Diagram (Single Direction) P 28 Hydraulic Control Diagram B 29 WHERE TO LOCATE THE WINDLASS The MAXWELL VWC and VWCLP . This is essentially standard wiring for my new windlass, but I made one big change: Instead of using the circuit breaker for on/off, I added a big Cole Hersee on/off switch (with Amp capacity.) The breaker needs to be by the battery, and more importantly I don’t like Maxwell’s breaker panel as an on/off switch.
More on that later. The winch is designed for clockwise rotation only for retrieval of the anchor rode or other rope warping line. The winch is not fitted with a locking mechanism to prevent back running.
Do not allow the winch to stall or labour. The winch is not designed to be used as a mooring point.
4 The AA must be fitted to a windlass with a dual direction control box or solenoid pack. 5 Information for installation and operation of the AA is supplied including preset windlass profile lists and wiring schematron.org instructions should be left on board for the owner.
Mounting of the Windlass Select a mounting location on the bow that allows the rode to drop directly into the anchor locker and also puts the gypsy in a straight line with the anchor roller. The minimum anchor-locker depth is 12 inches to the top of the rode pile.Windlass WiringConsent Form | Boating Magazine
