I just installed a MSD # distributor in my car.
I’ve got no spark. I used to have an HEI. I checked using MSD’s test, jumping the purple and.
MSD offers a Timing Light, PN Make sure you are not using Solid Core wires. Inspect the routing of the Magnetic Pickup Harness.
It should be routed clear. PN Note: Solid Core spark plug wires cannot be used with an MSD Ignition .
. These wires are routed together in one harness from the Magnetic Pickup. MSD Street Fire Ignition Control Installation User Manual • Rev limiter, Common mag pickup wires • MSD The magnetic pickup wires should always be.
There are two circuits that can be used to trigger the MSD Ignition; a. Points circuit (the White wire) and a Magnetic Pickup circuit (the Green and Violet wires).Digital: When using an MSD Digital-6 or Digital-7 Plus, or the Programmable Digital-7 Ignition Controls, the correct connection is when the timing is more advanced.
Wiring Routing the magnetic pickup wires can be very important to your engine’s performance. The magnetic pickup wires of an MSD Ignition Control are twisted together and routed in a separate sleeve with a 2-pin connector.
The Violet wire is positive and the Green wire is negative. This harness connects to the distributor pickup or a crank trigger pickup. Find great deals on eBay for msd Magnetic Pickup Connector Cable Wiring Harness.
Shop with confidence. The magnetic pickup wires of an MSD Ignition Control are twisted together and routed in a separate sleeve with a 2-pin connector. The Violet wire is positive and the Green wire is negative.
This harness connects to the distributor pickup or a crank trigger pickup. Katy, the magnetic pickup in the distributor is soldered to the module. It requires a a specific part number.
Please contact our the MSD Tech Support department at /5(51).Msd Wiring Diagram – Manual Guide Wiring Diagram •Magnetic pickup