ANDREAS STIHL AG & Co. KG, Contents. 1.
Introduction. 2.
2. Safety Precautions.
2. 3. Specifications.
3. Engine.
3. Ignition System.
3. Fuel.
FITS BR BR BR NEW STIHL BLOWER FUEL LINE KIT. | eBay!.
does anyone have a fuel hose diagram for a stihl br backpack blower? i am confused as i have replaced all the fuel lines and carb but the. The Stihl BR Magnum backpack blower is a professional-grade piece of Removal of these components allows you access to the primer bulb, fuel line and Stihl BR // · schematron.org: How to Replace Fuel Lines on.
Our system has returned the following pages from the Stihl BR data we have on file. Please use the box above to search for any other information.Nov 11, · does anyone have a fuel hose diagram for a stihl br backpack blower?
i am confused as i have replaced all the fuel lines and carb but the primer is not working right. also replaced fuel filter in tank.
i have tried to swap lines around but still no fuel coming through primer. i hooked the primer up directly to fuel lines from tank and it works but when i connect it back up to carb. it does.
Double check that the fuel lines are routed properly. Another place to look for a potential problem is where the fuel line comes out of the tank.
Make sure the hose is not pinched. The typical fuel line routing is the first line (the one with the fuel filter in the end of it) comes out of the tank and goes to the bottom fitting on the carburator.
NEW STIHL BLOWER FUEL LINE KIT. | eBay! FITS BR BR BR NEW STIHL BLOWER FUEL LINE KIT.
| eBay! NEW STIHL BR BR BR FUEL LINE KIT L@@K OEM. Sign in to check out Check out as guest.
Stihl BR Backpack Blower Brand New In Box. $Seller Rating: % positive.
BR , BR , BR English 5 THE USE OF THE POWER TOOL Transporting the Power Tool Fuel Your STIHL power tool uses an oil- gasoline mixture for fuel (see the chapter on “Fuel” of your instruction manual). Fueling Instructions In order to reduce the risk of burns and other personal injury from escaping gas vapor and fumes, remove the fuel.
STIHL BR , , BR pickup body and fuel line if necessary Free off inlet control lever Remove inlet control lever and refit correctly Fit new metering diaphragm Set inlet control lever flush with upper face of housing Turn low speed screw (L) counterclockwise (richer) no further than stop Turn high speed screw (H 5/5(3).BR HOW FUEL LINES ARE ROUTED FROM PRIMER BULB TO GAS – FixyaBR HOW FUEL LINES ARE ROUTED FROM PRIMER BULB TO GAS – Fixya