1) The common color code for re-wiring a 3 speed pull chain switch for I am using a Westinghouse 3 speed switch # dual capacitor. Zing Ear ZEs With 4 Pre-attached Wires (6A/VAC or 3A/VAC) . Westinghouse ; Sun-Lite SL-AC; Westinghouse Black wire in.
I replaced it with a Westinghouse , 3 speed fan switch. I was diligent to connect the wires onto the new switch as they were wired on the old one.
It’s the westinghouse switch. Many results on search. I just wasted 2 hours playing switching wires all combos.
Others suggested the switch. Just double check that the corresponding color wires match the “L, 1, 2, 3” on the .
Westinghouse Model “Dual Capacitor” switch from Home Depot or.Westinghouse Has a Legacy Of Excellence with Brilliant, Beautiful Lighting Solutions that Illuminate Your Life with the Ultimate in Quality and Value. My old fan switch had 3 speeds and an off position. The old switch was made by KTE and had terminals marked L, 1, 2, 3.
The pull chain broke inside of the plastic casing. I replaced it with a Westinghouse , 3 speed fan switch.
The Westingouse switch looks the same as the KTE and the 4 terminals are labeled the same: L, 1, 2, 3. The Westinghouse 3-Speed Ceiling Fan Switch is for use in single-capacitor ceiling fans.
Replacing the fan switch is a cost-effective alternative to buying a new fan. Westinghouse Antique Brass Replacement 3-Speed Fan Switch – The Home Depot/5(25).
Westinghouse Lighting – *, dual-capacitor three-speed fan switch. A few days ago the speed control chain broke off inside the switch. I went to my local Home Depot and bought a Westinghouse 3-speed switch as a replacement.
(When the chain broke, the fan was on Medium speed and continued to run at that speed until I shut off the power to do the switch replacement.).SOLVED: Westinghouse 3speed fan switch – FixyaHampton Bay ceiling fan speed switch replacement not working out | The Home Depot Community