Manuals for STRIKER™ 4. Manual Name, Revision, Revision Date, Part Number, Action. Important Safety and Product Information, F, May , View our Q&As for the Garmin STRIKER 4 Fishfinder with Dual Beam Transducer there is 4 wires to the electrical install. red with fuse to hot on battery,black to. There are a couple of things that may be unclear when looking to buy a fishfinder.
Being that there are many different brands you'll want to get. The Striker power/data cable consists of four wires: Red and Black - The red wire will connect to your positive battery terminal and the black wire will connect to.
CLEARVÜ SCANNING SONAR - Shows you more of what is in the water around your boat. This high-frequency sonar gives near-photographic images with.Zooming on the STRIKER Plus 4 You can zoom in and out of the map.
• Select to zoom in. • Select to zoom out. Panning on the STRIKER Plus 4 You can move the sonar views and maps to view an area other than your present location.
1 Select or to start panning. 2 Use the arrow keys to pan.
TIP: You can select to stop panning. Reply #6 on May 27, , am: I'm pretty sure the blue and brown are used to transfer waypoints among striker and echo map units.
You can hold Those two wires to their counterparts on another striker or echo map unit (with your fingers--believe it or not) and that will allow transfer of waypoints etc. like a quick temporary network!
The 5-inch STRIKER 5dv fishfinder has built-in, high-sensitivity GPS and Garmin CHIRP DownVu, the clearest scanning sonar on the water. Mark and return to your hot spots, boat ramps and docks.
echoMAP™ 40/50 Series Installation Instructions To obtain the best performance and to avoid damage to your boat, install the device according to these instructions. Read all installation instructions before proceeding with the installation.
2 thoughts on “Garmin striker 4 wiring”
Thanks for the valuable information. It very much was useful to me.
I apologise, but, in my opinion, you are mistaken. I suggest it to discuss.